The Role of a Grease Trap in Your Home

A grease trap, also known as an industrial grease trap, is an industrial plumbing device typically designed to catch FOG (foul organic compounds) before they are released into the wastewater. In many areas of the country, grease traps are required for use in commercial kitchens because of their key role in preventing expensive sewer overflow problems. Grease traps also are popular on industrial premises for use as a means of reducing the occurrence of grease fires in the kitchen and on equipment, such as grease-spewing ovens.

Grease Trap Cleaning

One of the most common types of grease traps is the “dry” grease trap which is designed to catch grease when it is first emitted. A wet trap, on the other hand, is designed to catch grease and oil when they are already on the bottom of the sewage drain, and are then no longer visible to the naked eye. The two types of grease traps have different functions.

A wet grease trap collects all forms of grease and oil, such as those from cooking, baking, and other kitchen uses. These grease traps generally are designed with a “wash” top that is made of a strong plastic material. These devices can usually be easily cleaned by simply removing the drain plug and running water through the device. In addition to this, there are often other drains at the home or commercial property, which should also be cleaned in order to ensure maximum effectiveness. Once the trap has been cleaned, it is then cleaned again at a later time.

Another type of grease trap is the “dry” grease trap which is designed to catch grease as it is emitted. This type of grease trap does not have a wash top and works best when combined with a “wash” drain trap, which is designed for the sole purpose of eliminating grease that has already reached the drain line. These types of grease traps are typically located near kitchen sinks, but they can also be found in public sewers or in areas where the drain is located on the outside of the property. They are designed so that they are very difficult to clean manually, because they are usually very tightly sealed.

While both types of grease traps can be useful, it is important to note that wet traps are typically more effective at removing grease from the drain. than the dry variety, and should always be used when possible. Some homeowners also prefer to use grease traps on the inside of their home or on non-porous drains because they can be removed and reused as often and can help remove the need to replace grease traps on porous drains, which can be costly.

Another key factor when selecting the right grease trap for use in the kitchen is to determine whether you prefer a “push-type” or a “pull-type” device. Push-type traps are more efficient in removing grease from the pipes because the grease is pulled out with force and is flushed out the bottom of the trap and away from the drain trap. Pull-type traps are used on more viscous drains that do not allow grease to run down the pipe because of the resistance from the drain and are therefore easier to dispose of.

If you need to use a grease trap, make sure to choose one with an effective sealant. To ensure that your grease trap is installed correctly, it is crucial to have a professional grease trap cleaning company inspect and install the trap for you.

Once your grease trap is installed properly, it is vital that you maintain the trap to avoid buildup of grease and other contaminants and to ensure the safety of your family, pets and equipment. If you use grease traps on a regular basis, the grease trap will become a valuable asset to your home and your household.